Monitor Cable Assy (Fru No. 101) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-3-2

Monitor Cable Assy (FRU No. 101)

Purpose: This is a description on how to remove and replace the Monitor Assy.
8-3-2-1 Tools
• Common pillips screwdrivers
• Cutter
8-3-2-2 Needed Manpower
• 1person, 5 minutes + travel
8-3-2-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
• Maneuver Control Console to a suitable position for removing the monitor.
8-3-2-4 Removal procedure
1.) Remove the OP Rear Cover. Refer to section 8-5-10 on page 58.
2.) Remove the Monitor Covers. For more information, refer to section 8-3-3 on page 8.
3.) Disconnect two connectors (1-2) and cut the tie wrap in the location (3). Refer to Figure 8-7.
Connector 1
Connector 2
8 - 6
7
Figure 8-7 Disconnect Connectors and Cut the tiewrap
Section 8-3 - Monitor
LOGIQ™ 5 PRO S
ERVICE
Tie wrap
M
ANUAL