(C) Trouble Image Save/Load/Display - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 7
4–3–3 Utility Menu (Continued)

(C) TROUBLE IMAGE SAVE/LOAD/DISPLAY

This saves the trouble image recorded in the Hard Disk into a Floppy or MO (Magneto Optical) Disk. This also
loads the image data saved in the Floppy or MO Disk into the Hard Disk and displays the selected trouble image
on the CRT monitor by using the image recall function.
Press and hold the Control key and press W to save the trouble image recorded in the VCR Playback
Memory into the hard disk. You can save the maximum 4 images into the hard disk of the system soft-
ware version 1.20 or former console. The system software version 2.00 or later console can save the
maximum 8 images.
Type 3 and then press Return key when the Utility Menu is displayed. The following screen is displayed.
Note
TROUBLE IMAGE SAVE/LOAD/DISPLAY
ILLUSTRATION 4–15
4–18
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS