Srx5400 Alarm And Management Cable Specifications And Pinouts; Alarm Relay Contact Wire Specifications For The Srx5400 Services Gateway; Console Port Cable And Wire Specifications For The Srx5400 Services Gateway - Juniper SRX5400 Hardware Manual

SRX5400 Alarm and Management Cable Specifications
and Pinouts
IN THIS SECTION

Alarm Relay Contact Wire Specifications for the SRX5400 Services Gateway | 165

Console Port Cable and Wire Specifications for the SRX5400 Services Gateway | 165

RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Ethernet Port | 166
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Auxiliary and Console Ports | 166
Alarm Relay Contact Wire Specifications for the SRX5400 Services Gateway
Table 45 on page 165 lists the specifications for the wires that connect to the alarm relay contacts.
Table 45: Cable and Wire Specifications for Alarm Interfaces
Port
Alarm relay contacts
Console Port Cable and Wire Specifications for the SRX5400 Services
Gateway
Table 46 on page 165 lists the specifications for the cable that connects a CONSOLE port on the Routing
Engine to a management console.
Table 46: Cable and Wire Specifications for Routing Engine Management and Alarm Interfaces
Port Cable Specification
Routing Engine RS-232 (EIA-232)
console or auxiliary serial cable
interface
Cable Specification
Wire with gauge between 28-AWG and 14-AWG (0.08
2
and 2.08 mm )
Cable/Wire Supplied
One 6-ft (1.83-m) length
with RJ-45/DB-9
connectors
Cable/Wire Supplied
No
Maximum
Length Receptacle
6 ft (1.83 m) RJ-45/DB-9
male
165