Troubleshooting Srx5400 Services Gateway Spcs - Juniper SRX5400 Hardware Manual

Services gateway

Hide thumbs Also See for SRX5400:

Table of Contents

user@host> show chassis fpc pic-status

For further description of the output from the command, see Junos OS System Basics and Services Command

Reference at www.juniper.net/documentation/.

Troubleshooting SRX5400 Services Gateway SPCs

Description: A Services Processing Card (SPC) is not functioning normally.

Make sure the SPC is properly seated in the midplane. Check that each ejector handle has been turned

clockwise and is tight.

Issue the CLI show chassis fpc command to check the status of installed SPCs. As shown in the sample

output, the value Online in the column labeled State indicates that the SPC is functioning normally:

user@host> show chassis fpc

For more detailed output, add the detail option. The following example does not specify a slot number,

which is optional:

user@host> show chassis fpc detail

SRX5k SPC II

SRX5k SPC II

SRX5k IOC II

2x 40GE QSFP+

10x 10GE SFP+

DRAM (MB) Heap