Flex I/O Card Port Module Srx-Ioc-16Ge-Sfp Specifications - Juniper SRX5400 Hardware Manual

Power Requirement
Weight
LEDs
Serial Number Location

Flex I/O Card Port Module SRX-IOC-16GE-SFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-16GE-SFP port module
installs into a Flex IOC to add sixteen 10/100/1000 Ethernet SFP ports.
312 W typical, 365 W maximum (includes port modules)
Approximately 10 lb (4.5 kg)
OK/FAIL LED, one bicolor:
Steady green–The Flex IOC is operating normally.
Red–The Flex IOC has failed and is not operating normally.
Off–The Flex IOC is powered down.
The serial number label is located as shown in
Figure 62: Serial Number Label (IOC Shown, Other Cards Similar)
OK /F AIL
Figure 62 on page 138.
Serial number
ID label
AA567 8
(Figure 63 on page
138
139)