Juniper SRX5400 Hardware Manual page 323

You can view the control port configuration from node 1:
root@node1>show configuration chassis cluster control-ports | display set
c. Commit the configuration:
root@node0# commit
NOTE:
You can verify the reachability of the external server from the node by using the
ping command.
d. Exit configuration mode:
root@node0# exit
root@node0>
e. Load the Junos OS image from the external server:
root@node0> start shell user root
root@node0% cd /var/tmp
root@node0% scp root@server-ip: junos-release-domestic.tgz /var/tmp/
root@node0% cli
root@node0>request system software add /var/tmp/junos-release-domestic.tgz reboot
The device reboots and comes up with the intended Junos OS version.
f. Copy the configuration file from the external SCP server:
root@node0% scp root@server-ip: /node0-config-yyyy-mm-dd /var/tmp/node0-config-yyyy-mm-dd
g. (Optional) If you backed up scripts, then restore the scripts from the external SCP server:
root@node0% scp root@server-ip: /commit-script.slax /var/db/scripts/commit/commit-script.slax
h. (Optional) Apply the licenses that you backed up in step 1:
root@node0>request system license add terminal
See Adding New Licenses (CLI Procedure)
i. Load the configuration:
root@node0> configure shared
Management and basic routing configuration are complete at this point.
326