Juniper SRX5400 Hardware Manual page 257

set interfaces reth1 vlan-tagging
set interfaces reth1 redundant-ether-options redundancy-group 1
set interfaces reth1 unit 0 vlan-id 30
set interfaces reth1 unit 0 family inet address 55.55.55.1/8
9. Verify that the secondary node is running the upgraded Junos OS release.
root@cluster> show version node1
Hostname: <displays the hostname>
Model: <displays the model number>
Junos: 15.1X49-D10
JUNOS Software Release [15.1X49-D10]
root@cluster> show chassis cluster status
Monitor Failure codes:
CS Cold Sync monitoring
GR GRES monitoring
IF Interface monitoring
LB Loopback monitoring
NH Nexthop monitoring
SP SPU monitoring
CF Config Sync monitoring
Cluster ID: 1
Node Priority Status
Redundancy group: 0 , Failover count: 1
node0 0
node1 100
Redundancy group: 1 , Failover count: 3
node0 0
node1 150
root@cluster>show chassis fpc pic-status node1
Slot 1 Online
PIC 0 Online
PIC 2 Online
Slot 2 Online
PIC 0 Online
Preempt Manual
lost n/a
primary no
lost n/a
primary no
SRX5k IOC II
1x 100GE CFP
2x 40GE QSFP+
SRX5k SPC II
SPU Cp
FL Fabric Connection monitoring
HW Hardware monitoring
IP IP monitoring
MB Mbuf monitoring
NP NPC monitoring
SM Schedule monitoring
Monitor-failures
n/a n/a
no None
n/a n/a
no None
260