Srx5400 Services Gateway Craft Interface Card Ok/Fail Leds; Srx5400 Services Gateway Craft Interface Fan Leds - Juniper SRX5400 Hardware Manual

Table 8: Power Supply LEDs on the Craft Interface
Label Color
PEM Green
Red

SRX5400 Services Gateway Craft Interface Card OK/Fail LEDs

Each slot in the card cage has a pair of LEDs on the craft interface that indicates the status of the card
installed in it. The card LEDs are located along the bottom edge of the craft interface and are labeled 0
for the bottom slot reserved for the SCB and 0/1, 1, and 2 for the remaining
describes the functions of the OK and Fail LEDs.
Table 9: Card OK/Fail LEDs
Label Color
OK Green
FAIL Red

SRX5400 Services Gateway Craft Interface Fan LEDs

The fan tray LED are located near the middle of the craft interface.
functions of the fan tray LEDs.
Table 10: Fan LEDs
Label Color
OK Green
FAIL Red
State
On steadily
On steadily
State
On steadily
Blinking
Off
On steadily
State
On steadily
On steadily
Description
Power supply is functioning normally.
Power supply has failed or power input has failed.
slots.Table 9 on page 36
Description
The card is functioning normally.
The card is transitioning online or offline.
The card is not online.
The card has failed.
Table 10 on page 36
Description
Fan tray is functioning normally.
Fan tray has failed.
36
describes the