Juniper SRX5400 Hardware Manual page 282

14. Power on the services gateway. The OK LED on the power supply faceplate should blink, then light
steadily.
15. Verify that the MPC is functioning correctly by issuing the show chassis fpc and show chassis fpc
pic-status commands. For example:
user@host> show chassis fpc
node0:
--------------------------------------------------------------------------
Slot State
0 Online
1 Offline
2 Online
Bring the MPC online for the first time by using the following CLI command:
user@host> request chassis fpc slot 1 online
node0:
--------------------------------------------------------------------------
Online initiated, use "show chassis fpc" to verify
user@host> show chassis fpc
node0:
--------------------------------------------------------------------------
Slot State
0 Online
1 Online
2 Online
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 1 Online
Temp CPU Utilization (%)
(C) Total Interrupt
37 23
---Offlined by cli command---
49 37
Temp CPU Utilization (%)
(C) Total Interrupt
37 6
44 11
49 22
SRX5k SPC II
SPU Cp
SPU Flow
SPU Flow
SPU Flow
SRX5k IOC II
Memory Utilization (%)
DRAM (MB) Heap
0 2048 19
0 1024 14
Memory Utilization (%)
DRAM (MB) Heap
0 2048 19
0 1024 23
0 1024 14
285
Buffer
14
25
Buffer
14
29
25