Juniper SRX5400 Hardware Manual page 339
Services gateway
Hide thumbs
Also See for SRX5400:
- Hardware manual (406 pages) ,
- Reference (109 pages) ,
- Manual (102 pages)
Table of Contents
Advertisement
Table 53: Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services
Gateways (continued)
Chassis
Component
Alarm Condition
Memory faults: DIMM
failures and ECC errors.
Real Time Clock battery
failure.
SSDs on the SRX5K-SPC3
missing or read/write to
SSD is failing or SSD file
system corrupt.
OPMC Boot FPGA Faults
Voltage sensor faults
Remedy
5.
Re-boot the Services
Gateway.
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Replace the SSD.
or
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Alarm
Severity
Red
Red
Red
Red
Red
343
Advertisement
Table of Contents
Troubleshooting
