Juniper SRX5400 Hardware Manual page 336

Table 53: Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services
Gateways (continued)
Chassis
Component Alarm Condition
Service Abnormal exit in the current
flow sessions of an SPU.
Processing Card
(SPC)
CPU Digital Thermal Sensor
(DTS) of the SPC reaches
high or over temperature
threshold.
FPC airflow temperature
sensors in SRX5K-SPC3
reach high or over or
crosses fire temperature
threshold.
FPC airflow temperature
sensors in SRX5K-SPC3
read/access failure.
SRX5K-SPC3 checks for
missing devices during boot
and reports.
Remedy
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Check the status of all fan
trays.
Check the status of all fan
trays.
If the alarm is present
consistently, then it
indicates a hardware issue.
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Open a support case using
the Case Manager link at
https://www.juniper.net/support/
or call 1-888-314-5822
(toll free, US & Canada) or
1-408-745-9500 (from
outside the United States).
Alarm
Severity
Red
Red
Red
Yellow
Red
Red
340