Upgrading MX240, MX480, and MX960 3D Universal Edge Router Power Supplies and Fan Trays
Table 2: Minimum Required Number of Power Supplies (continued)
MX240
MX240
MX480
MX480
MX480
MX960
MX960
Upgrading the MX240 and MX480 AC Power Supplies
Removing the MX240 and MX480 AC Power Supplies
14
All manuals and user guides at all-guides.com
AC – low line
DC
AC – high line
AC – low line
DC
AC
DC
NOTE: Junos OS Release 10.0 R2 is required to support the MX240 and
MX480 AC and DC high capacity power supplies, and the MX960 AC
high-capacity power supplies. Junos OS Release 10.2 R1 is required to support
the MX960 DC high-capacity power supplies.
NOTE: During the upgrade process, the MX Series router can simultaneously
run existing and high-capacity power supplies. However, it is recommended
to upgrade all power supplies to high-capacity power supplies.
NOTE: The minimum number of power supplies must be present in the router
at all times.
CAUTION: To maintain proper cooling and prevent thermal shutdown of the
operating power supply unit, each power supply slot must contain either a
power supply or a blank panel. If you remove a power supply, you must install
a replacement power supply or a blank panel shortly after the removal.
NOTE: After powering off a power supply, wait at least 60 seconds before
turning it back on.
2
1 (only 1 zone)
2
3
1 minimum per zone
1 minimum per zone
1 minimum per zone
Copyright © 2010, Juniper Networks, Inc.