Advertisement
PBX software requirements
Supported integration features
Nortel Norstar
3 .0 PBX HARDWARE REQUIREMENTS
3 B
•
PBXLink DMI-4(s), one per Four INTUITY
integration device) is available through Connected Systems
(888)538-6376.
• Systems must support the M7310 Digital Telephone. One M7310/M7324
per voicemail port.
•
700A-4 plugs to divide the DMI4 ports up from one cable
3 .1 PBX SOFTWARE REQUIREMENTS
4 B
•
Minimum Software: DR5 Release 5 or higher
4 .0 SUPPORTED INTEGRATION FEATURES
5 B
•
Forward to personal greeting
- busy
- ring-no-answer
- all calls
•
Message Waiting Indicator
- display
•
Automated attendant (see section 8.2)
•
Outcalling
•
Multiple return-to-operator
5 .0 CONFIGURING THE NORSTAR TO INTEGRATE
6 B
•
P lease refer to the PBXLink DMI-4 User Guide Chapter 5 for
7 B
detailed programming of the Nortel Norstar.
•
M ake sure that the extensions for the voicemail stations include the
8 B
station number.
•
C reate the hunt group by setting the stations up to forward from
9 B
one station to the next. DO NOT include the MWI port as part of
this hunt group.
•
E nsure the PrimeLine for each voicemail station is the intercom
1 0 B
and only one intercom line is assigned to each station.
•
I f the Auto Attendant is to answer incoming calls, only assign
1 1 B
these trunks to one station. If Auto Attendant is not used DO NOT
assign any of the trunks to the voicemail stations.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
Confidential
TM
ports (External
2
Advertisement
