Configure Aps; Configure Radius Server Example (Wpa2-Enterprise Only) - Avaya Communication Server 1000 Installation And Commissioning Manual

WLAN IP Telephony Manager 2245 configuration
Table 35: WPA2-Enterprise Parameters
Configure the SSID name.
Enable WPA2-Enterprise (802.1X) Security.

Configure APs

Table 36: Common Parameters
Set AP model and port.
Configure B-Band Radio (known as radio 1).
In this example, the B-Radio is disabled. The
A-Band radio is known as radio 2.
Disable load balancing between APs.
Repeat for all APs and radios.
Configure A-Band Radio (known as radio 2).
In this example, the A-Band radio is enabled,
set to Channel 161 at 15dBm. The radio
profile associated with the radio will be one
that was configured for SVP or WMM-
Power Save QoS.

Configure RADIUS Server Example (WPA2-Enterprise Only)

Table 37: Common Parameters
Configure a RADIUS server to be used by the
Trapeze controller. Timeout, retransmit, and
deadtime parameters can be customized as
148 Avaya WLAN IP Telephony Installation and Commissioning
Purpose
Purpose
Purpose
Command
set servie-profile <profile
name> ssid-name TALPHAX
set service-profile <profile
name> cipher-ccmp enable set
service profile <profile
name> rsn-ie enable set
service-profile <profile
name> attr vlan-name default
Command
se ap <ap#> port 1 model
MP-422
set ap <ap#> radio 1 mode
disable
set ap <ap#> radio <radio#>
load-balancing disable
set ap <ap#> radio 2 channel
161 radio-profile <radio
profile> mode enable tx-power
15
Command
set radius server <name of
RADIUS server> address <IP
Address of RADIUS server>
November 2010