Rack-Mount; Lan Connection; Power Connection - Avaya Communication Server 1000 Installation And Commissioning Manual

Installation

Rack-mount

The rack-mount kit is designed for mounting the WLAN IP Telephony Manager 2245 in a
standard 19-inch rack and contains the following equipment:
• Mounting plates—two for each WLAN IP Telephony Manager 2245 to be mounted.
• Screws—four rack-mount screws for each WLAN IP Telephony Manager 2245 to be
mounted.
Follow the steps in
rack-mount the WLAN IP Telephony Manager 2245.
Rack-mounting the WLAN IP Telephony Manager 2245
1. Remove the corner screws from the WLAN IP Telephony Manager 2245.
2. Screw the U-shaped end (round screw holes) of the two mounting plates to the
3. Screw the other end of the two mounting plates (oblong screw holes) to the rack.
4. Repeat steps 1-3 for each additional WLAN IP Telephony Manager 2245. The

LAN connection

Use an RJ-45 cable to connect the NETWORK port on the WLAN IP Telephony Manager 2245
to the connecting port on the Ethernet switch.

Power connection

Follow the steps in
Telephony Manager 2245.
Connecting the power
1. Connect the power plug from the AC adapter to the jack labeled PWR on the WLAN
2. Plug the AC adapter into a 110V AC outlet to supply power to the WLAN IP
104 Avaya WLAN IP Telephony Installation and Commissioning
Rack-mounting the WLAN IP Telephony Manager 2245
WLAN IP Telephony Manager 2245.
mounting plate is designed to provide the correct minimum spacing between units.
When mounting multiple units, stack the units in the rack as closely as possible.
Connecting the power
IP Telephony Manager 2245.
Warning:
Use only the provided Class II AC adapter with output 24V DC, 1A.
Telephony Manager 2245.
on page 104 to connect the power to the WLAN IP
on page 104 to
November 2010