Avaya Communication Server 1000 Installation And Commissioning Manual page 139

Perform the desired SVP-II configuration.
• Phones per Access Point—enter the number of simultaneous calls supported for the
AP type. AP specifications are described in
• 802.11 Rate—select Automatic to allow the wireless handset to determine its rate (up to
11Mbs). Select 1MB/2MB to limit the transmission rate between the wireless handsets
and APs.
• SVP-II Master—the IP address of the master of the WLAN IP Telephony Manager 2245
group must be identified. Select one of the following identification options:
- Enter the IP address of the master of the WLAN IP Telephony Manager 2245 in each
WLAN IP Telephony Manager 2245 group. Include the periods used in the IP
address.
- Enter DHCP. Ensure that the IP address of the master WLAN IP Telephony Manager
2245 is configured in the DHCP server and configure the other WLAN IP Telephony
Manager 2245 units to obtain the information from the DHCP server.
- Enter DNS. Ensure that the IP address of the master WLAN IP Telephony Manager
2245 is configured in the DNS server and configure the other WLAN IP Telephony
Manager 2245 units to retrieve this information from the DNS server.
• First Alias IP Address and Last Alias IP Address—enter the range of IP addresses
that this WLAN IP Telephony Manager 2245 can use when acting as a proxy for the
wireless handsets.
If you install multiple WLAN IP Telephony Manager 2245 units, you must configure a
different range of IP addresses for each WLAN IP Telephony Manager 2245. Use the
following formula to determine how many addresses to configure for each WLAN IP
Telephony Manager 2245: (number of handsets/number of WLAN IP Telephony Manager
2245 units) + 30%
Important:
All alias addresses must be on the same subnet as the WLAN IP Telephony Manager
2245. The IP addresses cannot be duplicated on other subnets or WLAN IP Telephony
Manager 2245 units. There is no limit to the number of IP addresses that can be
assigned, but the capacity of each WLAN IP Telephony Manager 2245 is 500 wireless
handsets.
• SVP-II Mode—select NetLink IP.
• Ethernet link—select auto-negotiate unless there is a need to specify the link speed.
• System Locked—use this option to take the system down for maintenance. The default is
N (No). Select Y (Yes) to prevent any new calls from starting. Enter N to restore normal
operation.
• Maintenance Lock—the system automatically sets this option to Y (Yes) after certain
maintenance activities that require a reset are performed, such as changing the IP
address. Maintenance Lock prevents any new calls from starting. This option cannot be
Avaya WLAN IP Telephony Installation and Commissioning
Configure the WLAN IP Telephony Manager 2245
Compatible Access Points on page 257.
November 2010 139