Avaya Communication Server 1000 Installation And Commissioning Manual page 207

oaiptlst.bin
oaipttlsb.bin
Avaya periodically upgrades the fnctla.bin file, which is the only file downloaded. The other
files are configuration files and their names are provided for information and backup purposes.
Obtain software using FTP
When using FTP, a host system is used to connect to a remote system. In this example, the
host is the client and the server is the WLAN Application Gateway 2246. The put command
means to copy the files from the host to the remote system.
Important:
FTP commands vary with the particular FTP program used. Use the following steps as a
general guide but be aware that an FTP program can use different terms to describe the
procedure.
Follow the steps in
using FTP.
Transferring the software using FTP
1. Navigate to the OAI Box Configuration screen and place the system in Maintenance
2. Connect to the WLAN Application Gateway 2246 using the command: FTP
3. Log on using the default administrator logon and password: adminadmin
4. At the FTP prompt, type binary.
5. At the FTP prompt, rename and transfer the functional code file to the client server or
6. After the file transfer is complete, use the Quit command to quit FTP.
7. Navigate to the NetLink OAI System screen for the WLAN Application Gateway
8. Select System Status.
Avaya WLAN IP Telephony Installation and Commissioning
File name
Transferring the software using FTP
Lock before proceeding with the FTP procedure.
This prevents new calls from starting. No calls can be in progress during the FTP
procedure.
<hostname> ORFTP <IP address>.
WLAN Application Gateway 2246.
put mog700.bin fnctla.bin
• MOG700.bin is the downloaded file.
• fnctla.bin is the new name of the file.
2246
Description
phone list configuration
redundant phone list configuration
on page 207 to transfer the software
Software
November 2010 207