Navigation; Toggle Options; Data Entry And Editing; Language - Avaya Communication Server 1000 Installation And Commissioning Manual

1. With the handset powered off, press and hold the Start key. While holding the Start
2. When the Administration menu appears, release the Start key.
Note:
If an administration password has been set, the display requires the user to enter the
password before opening the Administration menu. The default password is 123456. Press
NavOK after entering the numbers. If no password is set, the display proceeds directly into
the Administration menu.

Navigation

The navigation keys just below the softkeys are used to navigate through and select menu
options.

Toggle options

Some menu options that have only two possibilities operate on a toggle basis. The current
setting is shown on the second row of the display, called the info line. Press NavOK to toggle
between the settings. For example, when Enable PTT is the menu option, PTT Disabled
appears on the info line. If you select Enable PTT , PTT Enabled appears on the info line
and the menu option toggles to Disable PTT .

Data entry and editing

An asterisk (*) next to an option on the display indicates that it is selected. Use the Nav keys
and the softkeys to navigate and select desired options.
Enter numbers by pressing the buttons on the keypad. The blinking underscore identifies the
current cursor position. When entering alphanumeric strings, the CAPS/caps softkey appears
and can be pressed to toggle the case. Enter letters by repeatedly pressing the corresponding
key until the desired letter displays on the screen. Use the CAPS softkey to change the case
as needed.
To edit during entry, delete the character to the left of the cursor by pressing the Del softkey.
To replace an entry, delete it by pressing the Clr softkey and then enter the new data. To edit
an existing entry, use Nav < and Nav > to move the cursor position, and then press the Del
softkey to delete the character to the left. Insert new data by pressing the buttons on the
keypad.

Language

Choose a language from those on the list.
Avaya WLAN IP Telephony Installation and Commissioning
key, press and release the End key.
Administration menu
November 2010 111