Avaya Communication Server 1000 Installation And Commissioning Manual page 146

WLAN IP Telephony Manager 2245 configuration
Table 31: WMM Parameters
Enable Proxy-ARP. This eliminates delays in
audio at the start of a call and can be
necessary for a phone in standby to ring
when called.
Table 32: WEP Parameters
Configure SSID name.
Authentication set to open access.
Authentication set to shared access.
Set to 40-bit WEP security.
Set to 104-bit WEP security (called 128-bit in
the phone).
Choose the key index and the key. Note: if a
key index greater than 1 is used, the lower
keys must be filled with a value of the correct
number of digits.
Disable 802.1X Authentication.
Associate the service profile with a VLAN.
Table 33: WPA-PSK Parameters
Configure SSID name.
Authentication set to open access.
146 Avaya WLAN IP Telephony Installation and Commissioning
Purpose
Purpose
Purpose
Command
set service-profile <profile
name> proxy-arp enable
Command
set service-profile <profile
name> ssid-name TALPHAWPA2
set service-profile <profile
name> auth-fallthru last-
resort
set service-profile <profile
name> share-key-auth enable
set service-profile <profile
name> cipher-wep40 enable
set service-profile <profile
name> cipher-wep104 enable
set service-profile <profile
name> wep key-index 1 key
<either 10 ro 26 ASCI
characters representing
hexadecimal digits>
set service-profile <profile
name> attr vlan-name default
set service-profile <profile
name> attr vlan-name default
Command
set service-profile <profile
name> ssid-name TALPHAWPA2
set service-profile <profile
name> auth-fallthru last-
resort
November 2010