Avaya Communication Server 1000 Installation And Commissioning Manual page 35

Important:
If an Open Application Interface (OAI) is operational, up to four function key sequences are
assigned in the OAI configuration and override the function sequence established here. Use
unassigned key sequences (For example, Fcn + 8, 9, #, *) for OAI access.
Programming memory keys in the Wireless Telephone In certain IP environments, the end user
can program Line keys 1 to 6. These keys can be programmed in the handset just like they
are programmed in the i2004 Internet Telephone. Press Start and then press Fcn+1 (Goodbye).
The Wireless Telephone is in the idle state where the softkey display area is active but there
is no dial tone. The handset does not time out and revert to standby mode until the process is
completed by the user. This is equivalent to the on-hook idle state of the i2004 Internet
telephone. Follow the instructions provided with the i2004 Internet telephone for your IP system
to program or to change the programming for the Line 1 to 6 keys.
Feature Access
The following are descriptions of the features you can access.
Softkeys Some features can be accessed and activated by pressing a softkey. Examples are
Hold, Mute, Park, and Conference. Others are only available through the Line Menu or the
Feature List.
Line Menu While off-hook, press the Line key to view the key labels for line appearances and
line features. This list is updated whenever the PBX updates the programmable key labels. To
activate a line or a line feature, press the corresponding number key. Use the Nav buttons to
scroll and select, use the Line button to page between screens. Press the End key or the Cncl
softkey to exit the Line menu.
Feature List The i2004 Internet Telephone has several fixed feature keys. The [Communication
Server 1000 and BCM] implementation supports the features that are suitable to a mobile user
through the Function (Fcn) key on the Wireless Telephone. When Fcn is pressed, the display
lists the features and the assigned key. Press the End key or the Exit softkey to exit the list.
Activate the fixed features on the off-hook Wireless Telephone by pressing Fcn + the assigned
number key. You may also use the Nav keys to scroll through the items and activate the features
on this list.
If an OAI application is assigned to a key, OAI information appears on the Feature List.
For more information about features supported on the Wireless telephone, see
programming
Lock and unlock the keypad Because there is no Lock softkey, the keypad must be locked
through the Cfg softkey. Cfg+` locks the keypad and displays the Unlk softkey. Press Unlk+#
(the # key) to unlock the keypad.
Avaya WLAN IP Telephony Installation and Commissioning
WLAN Handset 2210/2211/2212 and Avaya 6120/6140 WLAN Handset
on page 32. Features that are not listed are not supported.
Feature
November 2010 35