Configure The Wlan Ip Telephony Manager 2245 - Avaya Communication Server 1000 Installation And Commissioning Manual

WLAN IP Telephony Manager 2245 configuration
Configuring WiFi Standard and CCX QoS Policy
1. In the navigation pane, click SERVICES.
2. Select QoS from the sub-menu.
3. Name the policy in the Policy Name field. For example WMM-PS.
4. To customize voice priorities, select the IP DSCP field, enter 46 in the text field,
5. Likewise, to configure control packet priorities select the IP DSCP field, enter 40 in
6. Click Apply in the Create/Edit Policies section of the screen.
Perform the following procedure to configure the Advanced tab.
Configuring the Advanced tab
1. Click the ADVANCED tab.
2. Under QoS Element for Wireless Phones, select the Disable option.
3. Disable WiFi MultiMedia (WMM), which is set by default.
4. Click Apply.

Configure the WLAN IP Telephony Manager 2245

The WLAN IP Telephony Manager 2245 is configured on the SVP-II Configuration screen
where the mode of the WLAN IP Telephony Manager 2245 is configured. This screen is also
used to lock the WLAN IP Telephony Manager 2245 for maintenance and reset the WLAN IP
Telephony Manager 2245 after maintenance.
The WLAN IP Telephony Manager 2245 automatically locks for maintenance if the IP address is
changed. When a Maintenance Lock occurs, the WLAN IP Telephony Manager 2245 must be
reset upon exit. All active calls are terminated during a reset.
Access the SVP-II Configuration screen from the NetLink SVP-II System menu. Scroll to SVP-
II Configuration and press Enter.
138 Avaya WLAN IP Telephony Installation and Commissioning
Note:
Assume that a DSCP value of 46 is used for voice packets and 40 for PBX control
packets.
select Voice < 10ms Latency (6) as the class of service, and click Add.
the text field, select Controlled Load (4) as the class of service, and click Add. This
results in two classifications.
November 2010