Avaya Communication Server 1000 Installation And Commissioning Manual page 33

Figure 2: i2004 Internet Telephone
For the sake of clarity, when Line keys 1 to 6 in the above diagram have been programmed to
lines, they are called Line Appearances. When these numbers are programmed to features,
they are called Line Features. Both are activated on the Wireless Telephone through the Line
key plus a number key.
Softkey Assignment
The following are descriptions of softkey assignments.
Standby mode-CS1000 In the Communication Server 1000, call server features include redial,
speed-dial, and phonebook. These features are therefore disabled in the handset. You can
access Communication Server 1000 features through the Directory Services option on the
Feature List. Press Fcn to display the Feature List.
Active idle mode and Active mode (CS 1000) After you press the Actv softkey, the handset
enters the active idle mode and the softkeys that are programmed from the PBX replace the
standby mode softkeys. This enables you to access features while still on-hook. The active
idle mode times out if no keys are pressed.
This same set of softkeys also appears when off-hook or in a call.
While in active idle or active mode, press Fcn to display the Feature List and softkeys that
activate handset features.
Avaya WLAN IP Telephony Installation and Commissioning
WLAN Handset 2210/2211/2212 and Avaya 6120/6140 WLAN Handset
November 2010 33