Network Status Screen - Avaya Communication Server 1000 Installation And Commissioning Manual

Troubleshooting
Manager 2245 active alarms and actions
to eliminate the alarm.
Table 43: WLAN IP Telephony Manager 2245 active alarms and actions
Maximum payload usage reached
Maximum telephone usage reached
Maximum Access Point usage reached
Maximum call usage reached
SRP audio delayed
SRP audio lost
No IP address
WLAN IP Telephony Manager 2245 lost
Press C to clear all clearable alarms.

Network Status screen

The WLAN IP Telephony Manager 2245 is connected to the Ethernet network (LAN). The
information about that connection is provided on the Network Status screen. The screen
displays information about the Ethernet network. This information can help troubleshoot
network problems.
To access the Network Status screen, select Network Status from the System Status Menu
screen.
Use the Network Status screen to view the following information:
• Ethernet Address—media access control (MAC) address of the WLAN IP Telephony
Manager 2245 (hexadecimal).
• System Uptime—the number of days, hours, and minutes since the WLAN IP Telephony
Manager 2245 was last reset.
• Net—the type of connection to the Ethernet switch currently utilized. Displayed as 10
(10BaseT) or 100 (100BaseT) half-duplex, or full-duplex.
• Max (maximum) calls—number of calls that can be supported by the WLAN IP
Telephony Manager 2245 (depends on network speed).
• RX—Ethernet statistics about the received signal during System Uptime.
- bytes—number of bytes received
162 Avaya WLAN IP Telephony Installation and Commissioning
Alarm text
on page 162 lists the alarms and the actions required
Action
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Configure an IP address
Reduce usage or replace lost WLAN IP
Telephony Manager 2245. Clear alarm.
November 2010