Software Update (Version 97.0701) For The Wlan Handsets 2210/2211/2212; Displays - Avaya Communication Server 1000 Installation And Commissioning Manual

For example, it is not possible to guarantee that all wireless handsets are upgraded as a result
of an isetResetAll command. To verify that a wireless handset is running the intended version of
software, use the isetShow command to determine the software version.
From the Signaling Server or Voice Gateway Media Card, use the oam> or IPL> isetGet
command to display a list of all currently registered wireless handsets that are running the old
hardware version. Use this command on all LTPS Signaling Servers or Voice Gateway Media
Cards that have IP Phones and wireless handsets currently registered:
oam> isetGet fwvsn==<old 221022112212 hardware version>
Software update (version 97.0701) for the WLAN Handsets
2210/2211/2212
To download version 97.0701 of the software for the WLAN Handsets 2210/2211/ 2212, go to
http://support.avaya.com/css/Products/P0852
compatible with new or existing wireless handsets.

Displays

When the wireless handset is powered on, it displays a series of messages indicating that it
is searching for new software, checking the versions, and downloading the software. During
the download, a progress bar on the wireless handset display screen displays the progress of
the download.
Important:
While the wireless handset is updating the software, the NO SVC message displays, and
the wireless handset must not be powered off. For approximately 10 seconds, the wireless
handset cannot be powered off. A warning message appears during that time. If the warning
message is not displayed, the wireless handset can be powered off without damage.
When the update is complete, the wireless handset displays the extension number, and is
ready for use.
Avaya WLAN IP Telephony Installation and Commissioning
and follow the instructions. Version 97.070 is
Software updates
November 2010 157