Avaya Communication Server 1000 Installation And Commissioning Manual page 239

ab7b -28 02
2ae5 -48 06
2ae5 -56 11
Any
In detail mode, the display appears as follows. The left and right arrow keys move between
AP indices.
i:bbbbb sn ch bcn
eeeeeeeeeee DGHI
rrrrrrrrrrrrr+xxxx
mmm G:gggg P:pppp
Any
• i = index of selected AP (value is from 0 to 3 inclusive)
• bbbbb = last three octets of the SSID for a discovered AP
• sn = signal strength in -dBm
• ch = channel
• bcn = beacon interval
• eeeeeeeeeee = SSID (up to first 11 characters)
• DGHI = standards supported
• rrrrr = rates supported—basic rates have a b following the rate
• + = more rates supported than displayed
• xxxx = WMM or UPSD if supported
• mmmm = security mode
• G:gggg = group key security
• P:pppp = pair-wise key security
• Any/MyID = soft key to toggle between single and multiple SSID mode
• Detl/Smry = soft key to toggle between the multiple AP display (summary) and the single
AP display (detail)
Important:
Numbers racing across the handset display indicate that AP information is being obtained.
A Waiting message indicates that the system is not configured properly and the handset
cannot find any APs.
Avaya WLAN IP Telephony Installation and Commissioning
ALPHA
WSMTES
voice
Detl
Smry
Diagnostic Tools
November 2010 239