Startup Sequence - Avaya Communication Server 1000 Installation And Commissioning Manual

Overview
Indicator
Muted
Locked
[No Service message]

Startup sequence

The Wireless telephone goes through an initialization sequence at startup. The line icons 1
to 9 appear and count down as the handset cycles through this sequence. If there is a problem
at a step that prevents initialization from continuing, an error message will appears and the
28 Avaya WLAN IP Telephony Installation and Commissioning
PBX ring icon. A regular telephone call is coming in.
OAI ring icon. A call is coming in from the OAI application.
The Push-to-talk (PTT) ring icon. A PTT call is coming in.
The priority PTT ring icon. A call is coming in on the priority
PTT channel. This call overrides all others.
The Ekahau Real-Time Location System (RTLS) is enabled.
The muted indicator appears after you press the Mute
softkey. It indicates that the microphone is not transmitting
sound. Press the Mute softkey again to unmute the
microphone.
Locked indicates that the keypad is locked to prevent
accidental activation. Use the Unlk softkey plus the # key to
unlock it.
If you do not disable the warning tones, an alarm sounds and
a descriptive message displays when the handset cannot
receive or place calls. You are outside of the covered area.
Walk back into the covered area. The in-service tone
indicates that service is reestablished.
The download icon indicates that the handset is
downloading code. This icon only appears while the handset
is running the over-the-air downloader. It appears to the right
of the Signal Strength icon in the same location as the voice
mail icon.
The download failure icon indicates that the handset has
failed to download code because the code is incompatible
with the handset hardware. The system also creates a
system log with the message: "Download aborted, code
incompatible". When this icon appears, the handset code in
the TFTP server must be updated.
Function
November 2010