Avaya Communication Server 1000 Installation And Commissioning Manual page 175

Wlan ip telephony
Hide thumbs Also See for Communication Server 1000:
Table of Contents

Advertisement

Message
No IP Address
No Net Access
No Net Found
(For the WLAN Handsets
2210/2211/ 2212 only.)
No Net Found
(For the Avaya 6120/6140
WLAN Handsets only.)
Avaya WLAN IP Telephony Installation and Commissioning
Description
Invalid IP address.
Cannot authenticate or
associate with AP.
This indicates any of the
following:
No radio link
No ESSID—Autolearn not
supported (or) incorrect
ESSID
AP does not support
appropriate data ranges
Out of Range
Incorrect WEP settings
Incorrect Security settings
This indicates any of the
following:
No radio link
No ESSID—Autolearn not
supported (or) incorrect
SSID
AP does not support
appropriate data ranges
Out of Range
Action
Check the IP address of the
wireless handset and
reconfigure if required.
Verify the AP configuration.
Verify that all the WEP
settings in the handset
match those in the APs.
Verify that the AP is turned
on.
Verify the ESSID of the
wireless LAN and enter or
Autolearn it again, if
required.
Check the AP configuration
against the AP Configuration
Note.
Try getting closer to an AP.
Check to see if other
handsets are working within
the same range of an AP. If
so, check the ESSID of the
handset.
Verify that all the WEP
settings in the handset
match those in the APs.
Verify that all the Security
setting in the AP.
Verify that the AP is turned
on.
Verify the SSID of the
wireless LAN and enter or
Autolearn it again, if
required.
Check the AP configuration
against the AP Configuration
Note.
Try getting closer to an AP.
Check to see if other
November 2010
Dropped calls
175

Advertisement

Table of Contents
loading

Table of Contents