Configure The Network - Avaya Communication Server 1000 Installation And Commissioning Manual

WLAN IP Telephony Manager 2245 configuration
Follow the steps in
page 134 to connect to the WLAN IP Telephony Manager 2245 through Telnet.
Connecting to the WLAN IP Telephony Manager 2245 through Telnet
1. Run a Telnet session to the IP address of the WLAN IP Telephony Manager 2245.
2. Enter the login and the password.

Configure the network

Select Network Configuration on the NetLink SVP-II System screen to configure the IP
address and other network settings of the WLAN IP Telephony Manager 2245. An optional
Hostname and the IP address of TFTP Server containing the software update files are also
configured here.
Configure the following Network Configuration screen fields with information provided by the
network administrator:
IP Address:—enter the complete IP address for the WLAN IP Telephony Manager 2245,
including digits and periods.
Important:
If this WLAN IP Telephony Manager 2245 is the master, it must have a static IP address
configured. Do not use DHCP to assign the IP address of the master WLAN IP Telephony
Manager 2245. Other WLAN IP Telephony Manager 2245 units in a multiple WLAN IP
Telephony Manager 2245 environment can have their IP address assigned by DHCP.
134 Avaya WLAN IP Telephony Installation and Commissioning
Connecting to the WLAN IP Telephony Manager 2245 through Telnet
The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. The following menu choices are
available:
• System Status—view software code version, error messages, and status of
operation. See View software version
page 161.
• SVP-II Configuration—set the mode and reset the system. See
WLAN IP Telephony Manager 2245
• Network Configuration—set network configuration options, including IP
addresses and hostname. See
• Change Password—change the password for WLAN IP Telephony Manager.
See Change the password
• Exit—exit the menu.
on page 154 and
on page 138.
Configure the network
on page 141.
on
Troubleshooting on
Configure the
on page 134.
November 2010