Avaya Communication Server 1000 Installation And Commissioning Manual page 198

WLAN Application Gateway 2246
Table 47: Pins on the connector
Connect to the Application Server through the LAN
The IP address must be configured for the WLAN Application Gateway 2246 to function on the
LAN. Follow the application instructions to identify the WLAN Application Gateway 2246 to the
application.
Figure 28: WLAN Application Gateway 2246 connection to Application Server through the LAN
Connect to Application Server through a modem
Connect the modem to the Gateway serial port using a cable that conforms to RS-232
standards for DTE-to-DCE connections. See
connection to Application Server through a modem
198 Avaya WLAN IP Telephony Installation and Commissioning
Pin
1
2
3
5
7
8
Function
Carrier Detect
Data OAI Receives
Data OAI Transmits
Ground
Ready to Send
Clear to Send
Figure 29: WLAN Application Gateway 2246
on page 199.
November 2010