Determining Alias Ip Addresses; Troubleshooting Coverage Issues - Avaya Communication Server 1000 Installation And Commissioning Manual

umsPolicyShow and umsUpdatePolicy
The IP Phone 2004 policy used in these commands is not applicable to handsets, even though
they are configured as IP Phones 2004 in the IP Line software. The wireless handsets are
upgraded using a different mechanism without the help of the UMS subsystem.
usiLibTrace
The usiLibTrace utility can be used to monitor UNIStim messages from the wireless
handsets by entering the alias IP address, not the wireless handset physical IP address.
-> usiLibTraceOn "192.168.10.200", 255, 255
value = 0 = 0x0

Determining alias IP addresses

When diagnosing network problems, (for example, to ping the wireless handset), it is useful to
know the mapping between the alias IP addresses as displayed by various Call Server
commands and the physical IP address of the wireless handset. There is no single command
that provides this information; however, the administrator can determine it in two ways:
1. If the wireless handset IP address is statically configured, the administrator can look
2. After the wireless handset is operating and in standby mode, the administrator can
For more information, see Avaya WLAN Handsets Fundamentals (NN43001-505).

Troubleshooting coverage issues

Coverage issues are best resolved by adding and relocating APs as required. Overlap issues
can be resolved by reassigning channels to the APs or by relocating the APs. For more
information, see
Avaya WLAN IP Telephony Installation and Commissioning
at the IP address of the wireless handset using the Admin menu, which is available
when the wireless handset is powered on.
look at the User Preferences menu to find the alias IP address of the wireless
handset.
Troubleshooting WLAN IP Telephony installations
Troubleshooting coverage issues
on page 211.
November 2010 185