Syslog Capture Configuration; Signaling Server Log Capture - Avaya Communication Server 1000 Installation And Commissioning Manual

Network diagram
For each element in the network, include the following information as it applies to each element:
• manufacturer
• model identification
• software version
• hardware version
• loadware version
• IP addresses
• MAC addresses
• port assignments
• VLANs
• other connectivity information

Syslog capture configuration

Configure DHCP Option 7 with the IP of the Syslog Server or, if you are not using DHCP,
configure this manually as a static entry in the handset
Configure the IP of the Syslog Server in the WLAN IP Telephony Manager 2245: Network
configuration > Syslog Server.
Configure the handset:
• Admin Menu > Diagnostics > Diagnostics mode on
• Admin Menu > Diagnostics > Syslog mode > full
If a Syslog Server is not available, use a public domain Syslog—for more information, see the
KIWI Syslog Daemon available from http://www.kiwisyslog.com/index.php.

Signaling Server log capture

Use the CLI to obtain a log capture from the Signaling Server.
Using the CLI to capture a Signaling Server log
1. Open a telnet session to the Signaling Server.
2. Start a file capture of the telnet session.
3. Use the level 2 pdt password for the system to enter pdt.
Avaya WLAN IP Telephony Installation and Commissioning
Data capture
November 2010 249