Avaya Communication Server 1000 Installation And Commissioning Manual page 174

Troubleshooting
Message
Multiple SVP Svr
yyy.yyy.yyy.yyy
Must upgrade SW!
Net Busy xxxxxxxxxxxx
No DHCP Server
No ESSID (For the WLAN
Handsets 2210/2211/ 2212
only.)
No SSID (For the Avaya
6120/6140 WLAN
Handsets only.)
No Func Code
No Host IP (Addr)
174 Avaya WLAN IP Telephony Installation and Commissioning
Description
y...y = WLAN IP Telephony
Manager 2245 IP address
Handset received responses
from multiple WLAN IP
Telephony Manager 2245
units; displays the IP address
of one responding WLAN IP
Telephony Manager 2245.
Handset software is
incompatible with the
hardware.
x...x = AP MAC address
Handset cannot obtain
sufficient bandwidth to support
a call; displays the MAC of the
failing AP.
Handset is unable to contact
the DHCP server.
Attempted to run the site
survey application without an
ESSID configured.
Attempted to run the site
survey application without an
SSID configured.
Handset software download
files are incorrect or corrupt.
The wireless handset is
configured for static IP (as
opposed to use DHCP) and no
valid host IP address (the
wireless handset IP address) is
entered.
Action
local ID must match the
username.
Happens if the handset is
reconfigured to use a
different WLAN IP Telephony
Manager 2245 and then
powered-down before the
previous server has had time
to determine that the
handset is no longer
connected to it. The problem
usually corrects itself in
about 30 seconds.
Download new software
from the Avaya site. See
Software updates on
page 155.
Try call again later.
Check that DHCP is
operational and connected
to the WLAN or use Static IP
configuration in the handset.
Let the handset come
completely up. Statically
configure an ESSID in the
Admin menu.
Let the handset come
completely up. Statically
configure an SSID in the
Admin menu.
Reconfigured the handset to
gain access to the WLAN
and download new code.
Enter a valid IP address in
the configuration settings or
change to use DHCP.
November 2010