Change The Password - Avaya Communication Server 1000 Installation And Commissioning Manual

- Inter-SVP2— traffic requires voice quality. Configure this class with a priority equal
to WT (in call).
• Reset—if this option is selected, a prompt appears to reset the WLAN IP Telephony
Manager 2245 when you exit the SVP-II Configuration screen.
• Reset all WLAN IP Telephony Manager 2245—if this option is selected, all WLAN IP
Telephony Manager 2245 units on the subnet are reset.
Important:
Resetting the WLAN IP Telephony Manager 2245 terminates any calls in progress.

Change the password

Avaya recommends that the default password be changed. Follow the steps in
password on page 141 to change the default or existing password.
Changing the password
1. Select Change Password from the NetLink SVP-II System menu.
2. Enter the old password, enter the new password, and confirm the new password.
3. Select Set Password and press Enter. Alternatively, press the S key on the
If you forget the password, use the steps in
log on to the WLAN IP Telephony Manager 2245.
Changing a forgotten password
1. Connect your terminal to the RS-232 port using a null-modem cable.
2. To communicate with the gateway, open a terminal emulation program, such as
3. Power cycle the WLAN IP Telephony Manager 2245.
4. After the log on prompt appears, within 60 seconds, enter the log on:
Avaya WLAN IP Telephony Installation and Commissioning
The Change Password screen appears.
The password parameters are as follows:
• must be more than four characters in length
• first character must be a letter
• other characters can be a letter or a number
• dashes, spaces, and punctuation marks are not allowed (alphanumeric only)
keyboard.
Record the password and keep it in a safe place.
HyperTerminal.
Changing a forgotten password
Change the password
Changing the
on page 141 to
November 2010 141