Radio Settings; Qos Configuration - Avaya Communication Server 1000 Installation And Commissioning Manual

Radio Settings

For information on the configuration of QoS radio settings, refer to the VIEW certified
documents applicable to the access points present in your solution.

QoS Configuration

The handset supports the following three Quality of Service (QoS) modes:
• • SVP (Spectralink Voice Priority)
• • WiFi Standard (WMM-Power Save and WMM-Admission Control)
• CCX (Cisco Client Extensions)
Configuring the AP for QoS is distinctly different depending what the desired QoS mode is.
Perform the following procedure to configure SVP QoS Policy.
Configuring SVP QoS Policy
1. In the navigation pane, click SERVICES.
2. Select QoS from the sub-menu.
3. At Create/Edit Policy, create and name a new QoS policy.
4. From to the drop-down list under Apply Class of Service (to the far right of IP
5. Click Add to add this classification to your new QoS policy.
6. Click Apply.
7. Under Apply Policies to Interface/VLANs, use the drop-down lists to apply the
8. Click Apply.
Perform the following procedure to configure WiFi Standard and CCX QoS Policy.
Avaya WLAN IP Telephony Installation and Commissioning
Protocol 119), select Voice <10ms Latency (6).
new QoS policy to:
a. Incoming for the FastEthernet.
b. Incoming and Outgoing for the Radio0-802.11G
c. Incoming and Outgoing for the Radio1-802.11A for the appropriate
interfaces of VLAN.
Radio Settings
November 2010 137