Dhcp Snooping Configuration Commands - D-Link 5000 Series Cli Reference Manual

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
DHCP Client Vendor Identifier Option............. Enabled
DHCP Client Vendor Identifier Option String...... D-LINK OSClient.

DHCP Snooping Configuration Commands

This section describes DHCP Snooping configuration.
5-433 ip dhcp snooping
Enable DHCP Snooping globally.
No command to disable DHCP Snooping globally.
ip dhcp snooping
no ip dhcp snooping
Parameters
None
Default
The default is Disabled.
Command Mode
Global Config
5-434 ip dhcp snooping vlan
Enable DHCP Snooping on a list of comma-separated VLAN ranges.
No command disables DHCP Snooping on VLANs.
ip dhcp snooping vlan vlan-list
no ip dhcp snooping vlan vlan-list
Parameters
vlan-list
Default
The default is Disabled.
Indicates the VLAN list or list range.
468