Network Management (Snmp) Commands - D-Link xStack DES-3526 Cli Manual

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual

Network Management (SNMP) Commands

The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
The DES-3526 supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can specify which version
of the SNMP you want to use to monitor and control the Switch. The three versions of SNMP vary in the level of security
provided between the management station and the network device. The following table lists the security features of the three
SNMP versions:
SNMP Authentication Method
Version
v1 Community String
v2c Community String
v3 Username
v3 MD5 or SHA
v3 MD5 DES or SHA DES
Description
Community String is used for
authentication − NoAuthNoPriv
Community String is used for
authentication − NoAuthNoPriv
Username is used for
authentication − NoAuthNoPriv
Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthNoPriv
Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthPriv.
DES 56-bit encryption is added
based on the CBC-DES (DES-56)
standard
26
7