Network Management Commands - D-Link DES-3250TG Command Line Interface Reference Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
N
ETWORK
The network management commands in the Command Line Interface
(CLI) are listed (along with the appropriate parameters) in the following
table.
The DES-3250TG supports the Simple Network Management Protocol
(SNMP) versions 1, 2c, and 3. You can specifiy which version of the
SNMP you want to use to monitor and control the switch. The three
versions of SNMP vary in the level of security provided between the
management station and the network device. The following table lists
the security features of the three SNMP versions:
SNMP Authentication
Version Method
v1 Community String
v2c Community String
v3 Username
v3 MD5 or SHA
M
ANAGEMENT
C
OMMANDS
Description
Community String is used for
authentication − NoAuthNoPriv
Community String is used for
authentication − NoAuthNoPriv
Username is used for
authentication − NoAuthNoPriv
Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthNoPriv
60
7