Ospf Neighbor Table - D-Link xstack DES-3810 series Reference Manual

®
xStack
Parameter
Area ID
Advertise Router ID
LSDB Type
Click the Find button to find the specified entry.
Click the View All button to view all the OSPF Link State Database entries.
Click the View Detail link to view the OSPF LSDB details of the specific entry.
After clicking the View Detail
Click the <<Back button to return to the previous window.

OSPF Neighbor Table

This window is used to display OSPF-neighbor information on a per-interface basis.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Neighbor Table, as shown below:
The fields that can be configured are described below:
Parameter
Neighbor IP Address
Click the Find button to find the specified entry.
Click the View All button to view all the entries.
OSPF Virtual Neighbor Table
This window is used to display OSPF-neighbor information of OSPF virtual links.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Virtual Neighbor Table, as shown
below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Description
Enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
Enter the router ID of the advertising router.
Specifies the LSDB type to be displayed. Options to choose from are None, RTRLink,
NETLink, Summary, ASSummary, ASExtLink, NSSA Ext and Stub.
link, the following window will appear:
Figure 6-45 OSPF LSDB Table – View Detail window
Figure 6-46 OSPF Neighbor Table window
Description
Enter the IP address of the neighbor router.
200