Paper Exit; Paper Overflow Sensor; Paper Exit Sensor - Ricoh SH-P1 M020 Field Service Manual

Paper Exit

Paper Overflow Sensor

1. Right cover ( p.56)
2. Left cover ( p.57)
3. Upper cover ( p.58)
4. Engine board with bracket (
5. Controller box ( p.97)
6. Paper overflow sensor [A] (
• Remove the paper overflow sensor while lifting the feeler up.
• Use a small minus screwdriver to release the hooks of the sensor.
When reinstalling the Paper Overflow Sensor:
Make sure the feeler is fitted into the sensor's notch.

Paper Exit Sensor

1. Left cover ( p.57)
2. Engine board with bracket (
3. Controller box ( p.103)
p.103)
x 1, hooks x 3).
p.103)
Paper Exit
4
93