Engine Board Bracket - Ricoh SH-P1 M020 Field Service Manual

4. Replacement and Adjustment
4
5. Slide the engine board [A] in the direction indicated by the arrow and remove it (
When installing a new engine board
1. Remove the EEPROM from the old engine board.
2. Install the EEPROM on the new engine board.
3. Reassemble the machine.
4. Turn on the main power of the machine.
5. "SC995-01" occurs.
6. Enter the SP mode, and then select SP5-811-004.
7. Enter the serial number with SP5-811-004, and then exit the SP mode.
8. Turn the main power of the machine off and on.
• Make sure you print out the SMC reports ("SP Mode Data" and "Logging Data") before you
replace the EEPROM.
• Keep the EEPROM away from any objects that can cause static electricity. Static electricity can
damage EEPROM data.

Engine Board Bracket

1. Engine board (
102
p.100)
x 6).