Ricoh SH-P1 M020 Field Service Manual page 189

5846 010 LDAP Search TOut
5846 041 AddrB Acl Info
5846 043 AddrB Media
5846 047 Ini Local AddrB
Sets the length of the time-out for the search of the
LDAP server.
[1 to 255 / 60 /1]
This SP must be executed immediately after installation
of an HDD unit in a basic machine that previously had
no HDD. The first time the machine is powered on with
the new HDD installed, the system automatically takes
the address book from the NVRAM and writes it onto
the new HDD. However, the new address book on the
HDD can be accessed only by the system
administrator at this stage. Executing this SP by the
service technician immediately after power on grants
full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created
on the HDD automatically. However, at this point
the address book can be accessed by only the
system administrator or key operator.
5. Enter the SP mode and do SP5846 041. After
this SP executes successfully, any user can access
the address book.
Displays the slot number where an address book data
is in.
[0 to 30 / - / 1]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
Clears all of the address information from the local
address book of a machine managed with UCS.
Engine Service Mode
5
187