Ricoh SH-P1 M020 Field Service Manual page 173

5816 063 HTTP Proxy Host
5816 064 HTTP Proxy Port
5816 065 HTTP Prox AutUsr
5816 066 HTTP Prox AutPass
This SP sets the address of the proxy server used for
communication between embedded RCG-N and the
gateway. Use this SP to set up or display the
customer's proxy server address. The address is
necessary to set up embedded RCG-N.
• The address display is limited to 128 characters.
Characters beyond the 128 character are
ignored.
• This address is customer information and is not
printed in the SMC report.
This SP sets the port number of the proxy server used
for communication between embedded RCG-N and
the gateway. This setting is necessary to set up
embedded RCG-N.
• This port number is customer information and is
not printed in the SMC report.
This SP sets the HTTP proxy certification user name.
• The length of the name is limited to 31
characters. Any character beyond the 31st
character is ignored.
• This name is customer information and is not
printed in the SMC report.
This SP sets the HTTP proxy certification password.
• The length of the name is limited to 31
characters. Any character beyond the 31st
character is ignored.
• This name is customer information and is not
printed in the SMC report.
Engine Service Mode
5
171