Ricoh SH-P1 M020 Field Service Manual page 195

5857 010 HDD to SD Any
5857 011 Erase HDD Debug
5857 012 Erase SD Debug
5857 013 Dsply-SD Space
5857 014 SD to SD Latest
5857 015 SD to SD Any
5857 016 Make HDD Debug
5857 017 Make SD Debug
Debug Log Save: SC
These SPs select the content of the debugging information to be saved to the
5858
destination selected by SP5857-002.
SP5858-003 stores one SC specified by number.
5858 001 Engine SC
5858 002 Controller SC
Takes the log of the specified key from the log on the
hard disk and copies it to the SD Card.
A unique file name is generated to avoid overwriting
existing file names on the SD Card. Up to 4 MB can
be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card. This SP does not
execute if there is no log on the HDD with no key
specified.
Erases all debug logs on the HDD
Erases all debug logs on the SD Card. If the card
contains only debugging files generated by an event
specified by SP5858, the files are erased when
SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and
on.
Displays the amount of space available on the SD
card.
Copies the last 4MB of the log (written directly to the
card from shared memory) onto an SD card.
This SP copies the log on an SD card (the file that
contains the information written directly from shared
memory) to a log specified by key number.
This SP creates a 32 MB file to store a log on the HDD.
This SP creates a 4 MB file to store a log on an SD
card.
Stores SC codes generated by printer engine errors.
(0: OFF 1: ON)
Stores SC codes generated by GW controller errors.
(0: OFF 1: ON)
Engine Service Mode
5
193