Ricoh SH-P1 M020 Field Service Manual page 44

2. Installation
• [B]: Up to three paper feed units (M386 [D]) and one paper feed unit (M389 [E]) can be installed
on the floor.
• [C]: Attach the optional paper feed unit with casters (M389 [E]) to the bottom of the machine to
install the machine directly on the floor.
2
1. Remove all tape and cardboard from the optional paper feed unit [A].
2. Pull the paper tray of the main unit part way out; then, remove the tape and cardboard in the
paper tray, and push the tray back in.
3. Lift the printer using the inset grips on both sides of the printer.
• When moving the printer, do not hold on the following parts as doing so could cause a
malfunction:
• The handle of the standard paper tray.
• The underside of the by-pass tray.
42