Ricoh SH-P1 M020 Field Service Manual page 162

5. System Maintenance Reference
5801 017 CCS
5801 018 SRM Memory Clr
5801 019 LCS
5801 021 ECS
5802 Free Run
5802 001 Free Run
5
Input Check
5803
Displays signals received from sensors and switches.
SP Modes other than those listed in this table, are not used in the machine.
Operation Panel
5803 001 Cover Open
5803 002 Main Motor: Lock
5803 003 Polygon: Lock
5803 005 Main FAN: Lock
5803 006 PSU FAN: Lock
160
Initializes the CCS (Certification and Charge-control
Service) settings.
Initializes information in non-volatile RAM.
Initializes information in non-volatile RAM.
Initializes the ECS settings.
Execution of a Free Run
The machine performs a free run.
[0 to 1 / 0 / 1]
Press [#Enter] to start.
Press [#Enter] to stop.
• The machine will not stop immediately after the
[#Enter] key is pressed.
Component Name
Cover sensors
[0x00 to 0x11 / 0x00 / 0x01]
Main Motor lock
[0x00 to 0x01 / 0x00 / 0x01]
Polygon Motor lock
[0x00 to 0x01 / 0x00 / 0x01]
Exhaust fan
[0x00 to 0x01 / 0x00 / 0x01]
PSU fan
[0x00 to 0x01 / 0x00 / 0x01]