When Stacking Four Optional Paper Feed Units - Ricoh SH-P1 M020 Field Service Manual

4. Set the machine [A] on the paper feed unit [B].
• Two people are required to lift the machine.
• When installing a second paper feed unit, place it on the first paper feed unit before placing
the printer onto the pair of paper feed units
5. Remove the paper(s) tray from the paper tray unit(s).
6. Load paper into the paper tray(s). Adjust the side and end fences as necessary. If loading 8
14" paper, remove the end fence and set it in the special compartment.
7. Insert the paper tray(s) back in the paper tray unit(s).
TK1120 RTB 2
Points to check at installation

When stacking four optional paper feed units

Paper feed units should be fixed to each other with screws when stacking four optional paper feed units.
Fix the paper feed units to each other as described below.
Paper Feed Unit TK1120 (M386)
1
/ "x
2
2
43