Ricoh SH-P1 M020 Field Service Manual page 176

5. System Maintenance Reference
5816 091 CERT: SeriNum
5816 092 CERT: Issuer
5816 093 CERT: St ExpTime
5816 094 CERT: End ExpTime
5816 200 Polling Man Exc
5
5816 201 Instl: Condition
5816 202 Instl: ID #
5816 203 Instl: Reference
174
Displays serial number for the @Remote certification.
Asterisks (***) indicate that no DESS exists.
Displays the common name of the issuer of the
@Remote certification. CN = the following 30 bytes.
Asteriskes (***) indicate that no DESS exists.
Displays the start time of the period for which the
current @Remote certification is enabled.
Displays the end time of the period for which the
current @Remote certification is enabled.
Executes manual polling. Cumin periodically polls the
@Remote Gateway by HTTPS. This is called "center
polling". Use this SP at any time to poll the @Remote
supply center.
Displays a number that indicates the status of the
@Remote service device.
0: Neither the registered device by the embedded
RCG nor embedded RCG device is set.
1: The embedded RCG device is being set. Only Box
registration is completed. In this status the external
RCG unit cannot answer a polling request.
2: The embedded RCG device is set. In this status the
external RCG unit cannot answer a polling request.
3: The registered device by the embedded RCG is
being set. In this status the embedded RCG device
cannot be set.
4: The registered module by the embedded RCG has
not started.
Allows entry of the number of the request needed for
the embedded RCG device.
Executes the inquiry request to the @Remote GateWay
URL.