Ricoh SH-P1 M020 Field Service Manual page 214

5. System Maintenance Reference
7931 011 Serial No.
7931 012 Remaining Toner
5
7931 013 Toner End
7931 014 Refill Flag
7931 015 R:Total Counter
7931 016 E:Total Counter
7931 017 Unit Counter
7931 018 Install Date
212
Displays an ASCII string that identifies the
manufacturer
Default: 16
• This data is originally entered as BCD and
changes into a 16-character string in order to
convert it to ASCII.
• However, only 10 bytes can be used to
communicate with the controller, so the 16 bytes
are truncated to 10 bytes.
Displays "0" to "100" (the percentage of toner
remaining in the cartridge)
[ 0 to 100 / 0 / 20]
N: Toner near end
E: Toner end
Default: 1
Displays "RF" when the cartridge requires refilling
Default: 2
Displays a number in the range "0" to "99999999",
this is the total count at time of installation.
[ 0 to 99999999 / 0 / 1]
Displays a number in the range "0" to "99999999",
this is the total count at toner end.
[ 0 to 99999999 / 0 / 1]
Displays a number in the range "0" to "99999999",
this is the total number of pages output by the AIO unit.
Counter adds once for each sheet output.
[ 0 to 99999999 / 0 / 1]
Displays Year-Month-Date of installation for the AIO
unit, this setting updates automatically through a serial
interface with the machine when the new unit is
installed.
Default: 8