Ricoh SH-P1 M020 Field Service Manual page 194

5. System Maintenance Reference
5856 Remote ROM Update
5856 002 Local Port
5857 Debug Log Save
5
5857 001 ON/OFF
5857 002 Target 2:HDD 3:SD
5857 005 Save to HDD
5857 006 Save to SD Card
5857 009 HDD to SD Latest
192
When set to "enable" allows reception of firmware
data via the local port (IEEE 1284) during a remote
ROM update.
0: Disallow
1: Allow
This setting is reset to "disable" after the machine is
cycled off and on.
Switches on the debug log feature. The debug log
cannot be captured until this feature is switched on.
[0 to 1 / 0 / 1]
0: OFF
1: ON
Selects the destination where the debugging
information generated by the event selected by
SP5858 will be stored if an error is generated
[2 to 3 / 2 / 1]
2: HDD
3: SD Card
Specifies the decimal key number of the log to be
written to the hard disk.
Specifies the decimal key number of the log to be
written to the SD Card.
Takes the most recent 4 MB of the log written to the
hard disk and copies them to the SD Card.
A unique file name is generated to avoid overwriting
existing file names on the SD Card. Up to 4MB can be
copied to an SD Card. 4 MB segments can be copied
one by one to each SD Card.