Ricoh SH-P1 M020 Field Service Manual page 234

5. System Maintenance Reference
Example: G1772700016.nv,
11. Exit the SP mode.
12. Turn off the main power switch.
13. Remove the SD card.
14. Mark the SD card with the machine code for later reference. You will need this SD card to
download NVRAM to the new NVRAM.
• One SD card can store the NVRAM data of two or more machines.
Downloading NVRAM Data
Follow this procedure to download the data from the SD card to the NVRAM, after the NVRAM has
5
been replaced.
• If the NVRAM data file cannot be downloaded successfully, the settings must be restored manually
using the SMC report that was printed before NVRAM uploading.
1. Confirm that the main power switch is off.
2. Confirm that you have the SD card that contains the proper NVRAM data for the machine.
3. Remove the SD card slot cover [A] (
4. Insert the SD card into Slot 2 [D] (Lower).
5. Turn on the main power switch.
6. Enter the SP mode and do SP5825 (NVRAM Download).
7. Push [#Enter].
232
x 1 [B]).